Stainless Steel
Tailored Solutions to Meet Customer Requirements
As one of the largest processors and distributors of stainless steel products in North America, we provide an extensive inventory of high-quality, competitively-priced offerings. We leverage our industry expertise, breadth of experience and our investments in innovative technology to offer you unmatched precision processing and finishing services.
Sheet and Coil: Blanking, cut to length, leveling, shearing
Plate: Laser, plasma (hi-def & conventional), saw cutting, water jet
Bar: Cutting, grinding, gun drilling, heat treating, trepanning
Pressure Pipe and Fittings: Cleaning, cut-to-length, PMI
Pressure Tube: Produced to precise length requirements
Ornamental and Structural Tube
Beveling
Forming
Grinding
Heat treating
Polishing
Rolling
Stainless Angle - Equal Leg
Grade | 304L, 316L | |
Finish | HRAP | |
Size | 3/4 x 3/4" x 1/8" up to 6" x 6" x 1/2" | |
Production | HRAP, Laser Fused |
Stainless Angle - Unequal Leg
Grade | 304, 304L, 316, 316L | |
Thickness | 3/16" to 1/2" | |
Finish | HRAP | |
Production | HRAP, Laser Fused | |
Leg | 2" - 9" Wide (Non-standard sizes, lengths, and grades available upon request) |
Stainless Fittings
Grade | 304, 304L, 316, 316L, 317L, 321, 347, 410, LDX2101, 2205, 2507, 254SMO, 20, 200, 400, 600, 625, 800H, 800HT, 825 | |
Pressure | 150#, 1M#, 3M#, 6M# Fittings (Threaded & Socket-Weld), 90's, 45's, Tees, Bushings, Couplings, Street Elbows, Unions, etc. | |
Buttweld | Sch5 thru XXH, LR/SR 90's, 45's, Tees, Concentric/Eccentric Reducers, Wyes, etc. | |
Flanges | 150# thru 1500# as well as Plate Flanges, Blinds, Socket-Weld, Slip-Ons, Weld-Necks, Threaded, Lap Joints | |
Accessories | On Inquiry | |
Samuel Locations (United States) | Alpharetta, GA; Denver, CO; Ham Lake, MN; Hayward, CA; Hermitage, PA; Houston, TX; Marshfield, WI; Tampa, FL | |
Samuel Locations (Canada) | Hamilton, ON |
Stainless Flat Bar - Processed (A240)
Grade | 304, 304L, 316, 316L | |
Length | Up to 20 ft. | |
Size | 1/8" x 1/2" up to 3/4" x 12" |
Stainless Flat Bar - True Bar/HRAP (A276)
Grade | 303, 304, 304L, 316, 316L, 321, 347, 410, 416, 420, 440C, 17-4 | |
Length | Up to 20 ft. | |
Size | 3/16" x 3/4" up to 4" x 8" | |
Samuel Locations (United States) | Alpharetta, GA; Baton Rouge, LA; Denver, CO; Ham Lake, MN; Hayward, CA; Hermitage, PA; Houston TX; Irving, TX; Lancaster, NY; Marshfield, WI; Portland, OR; Rochester, NY; Tampa, FL; Troy, MI | |
Samuel Locations (Canada) | Dartmouth, NS; Hamilton, ON; Laval, QC; Bothwell, ON |
Stainless Hex
Grade | 303, 304, 304L, 316, 316L, 416, 17-4 | |
Finish | Cold Drawn | |
Size | 3/16" - 3" |
Stainless Pipe (Welded & Seamless)
Grade | Austenitic (304, 304H, 304L, 316, 316L, 317L, 321, 347), Ferritic (410), Duplex (LDX2101, 2205, 2507, 254SMO), Nickel Alloys (20, 200, 400, 600, 625, 800H, 800HT, 825) | |
Finish | HRAP, CDA, BA, Polished | |
Size | 1/4" thru 96" | |
Schedule | 5 thru XXH | |
Samuel Locations (United States) | Alpharetta, GA; Denver, CO; Ham Lake, MN; Hayward, CA; Hermitage, PA; Houston, TX; Marshfield, WI; Tampa, FL | |
Samuel Locations (Canada) | Hamilton, ON |
SS - Stainless Plate (CMP, PMP, DISCRETE)
Grade | 304, 304H, 304L, 309S, 310S, 316H, 316L, 317L, 321, 321H, 904L, Alloy 20, 254SMO, 409, 410, 410S, LDX2101, 2002, 2003, 2205, 2304, 2507, 17-4, 15-5 200, 25-6HN, 400, 600, 601, 625, 800H, 800HT, 825, C276 | |
Thickness | 3/16" - 6" | |
Width | 48" - 120" | |
Length | 96" - 528" | |
Processing | High Definition Plasma (up to 3/4" thick - table capacity 144"W x 540"L), Bevel Head, Conventional Plasma (up to 6" thick - table capacity 132"W x 564"L), Water-Jet Cutting (up to 6" thick - table capacity 120"W x 360"L), Laser Cutting (up to 1/2” table 80” x 160”, Haas VF-1150, CNC Vertical Mill (with 120” x 40” x 30” travels) | |
Value Added | Laser Cutting, Polishing, Grinding, Heat Treating, Saw Cutting, Forming, Rolling, Shearing, Beveling | |
Samuel Locations (United States) | Alpharetta, GA; Baton Rouge, LA; Blasdell, NY; Denver, CO; Ham Lake, MN; Hayward, CA; Hermitage, PA; Houston, TX; Irving, TX; Lancaster, NY; Marshfield, WI; Pittsburgh, PA; Portland, OR; Rochester, NY; Tampa, FL; Troy, MI | |
Samuel Locations (Canada) | Dartmouth, NS; Hamilton, ON; Laval, QC |
Stainless Round Bar
Grade | 303, 304, 304H, 304L, 316, 316L, XM-19, 410, 410QT, 410DQT, 416, 416RQ, 416HT, 431, 2205, LDX2101 17-4, 17-4 DH1150, 17-4 H1075, 17-4 H1050, 15-5 400, 405, K500, 600, 601, 200, 201, 825, 625, 718, 800, 800HT, C276 | |
Processing | Cutting up to 20" diameter, Turning - to 12", Straightening - to 8", Chamfering - 1/4" to 1 1/2" diameter, Polishing - to 12" diameter | |
Finish | Cold Drawn, Cold Finished, Smooth Turned, Rough Turned, Hot Rolled, Centerless Ground, Turned Ground & Polished, Bearing Shaft Quality, Pump Shaft Quality | |
Size | 1/8" - 24" diameter | |
Samuel Locations (United States) | Alpharetta, GA; Baton Rouge, LA; Denver, CO; Ham Lake, MN; Hayward, CA; Hermitage, PA; Houston, TX; Irving, TX; Lancaster, NY; Marshfield, WI; Portland, OR; Rochester, NY; Tampa, FL; Troy, MI | |
Samuel Locations (Canada) | Hamilton, ON |
Stainless Sheet & Coil
Grade | 201, 301, 304, 304L, 309, 310, 316, 316L, 321, 409, 409L, 410, 410S, 430, 434, 436, 439, 441, 444, 3CR12, 4003, 41003, LDX2101, 2003, 2205 20, 200, 25-6HN, 400, 600, 601, 625, 800H, 800HT, 825, C276, 18cRcB, 17-4Ph, 2507, CHROMESHIELD® 22 | |
Thickness | 28 ga to 7 ga (access to 0.010" to 0.250") | |
Width | 0.05" to 72" | |
Length | 96" to 528" | |
Processing | High Definition Plasma (Up to 5/8" thick - table capacity 120"W x 390"L), Conventional Plasma (Up to 6" thick - table capacity 132"W x 564"L), Water-Jet Cutting (Up to 6" thick - table capacity 120"W x 360"L), Leveling, Cut-to-Length, Slitting, Precision Blanking | |
Value Added | Embossing, Forming, Prepaint, Polishing, Shearing | |
Samuel Locations (United States) | Alpharetta, GA; Baton Rouge, LA; Denver, CO; Ham Lake, MN; Hayward, CA; Hermitage, PA; Houston, TX; Irving, TX; Lancaster, NY; Marshfield, WI; Portland, OR; Rochester, NY; Tampa, FL; Troy, MI | |
Samuel Locations (Canada) | Dartmouth, NS; Hamilton, ON; Burlington, ON; Laval, QC |
Stainless Square
Grade | 303, 304, 304L, 316, 316L, 416, 17-4 | |
Finish | Cold Drawn | |
Size | 3/16" - 3" |
Stainless Tees
Grade | 304L, 316L | |
Thickness | 1/8" to 1/4" | |
Finish | HRAP | |
Size | 3/4" x 3/4" x 1/8" to 2 1/2" x 2 1/2" x 1/4" | |
Production | HRAP, Laser Fused |
Stainless Tube - Welded & Seamless
Grade | 304, 304L, 316, 316L, 309S, 310S, 317L, 321, 347, 410, LDX2101, 2205, 2507, 254SM0, 20, 200, 400, 600, 625, 800H, 800HT, 825 | |
Size | 1/8" - 12+" | |
Finish | HRAP, BA | |
Wall Thickness | 0.028" - 0.250" | |
Samuel Locations (United States) | Alpharetta, GA; Denver, CO; Ham Lake, MN; Hayward, CA; Hermitage, PA; Houston, TX; Marshfield, WI; Tampa, FL | |
Samuel Locations (Canada) | Dartmouth, NS; Hamilton, ON |
Stainless Pipe - Welded & Seamless
Grade | 304, 304H, 304L, 316, 316L, 317L, 321, 347, 6Mo, 410, LDX2101, 2205, 2507, Alloy 20, 200, 400, 600, 625, 800H, 800HT, 825 | |
Size | 1/4" - 96" | |
Finish | HRAP, Polished | |
Wall Thickness | Sch 5 - XXH |
Ornamental & Structural Welded Stainless Tube - Round, Square & Rectangular
Grade | 304, 304L, 316, 316L, 409 | |
Size | 3/4" - 12+" | |
Finish | Mill finish, CDA, BA, 180 Grit, Polish & Buffed, Sanitary | |
Wall | 0.035" - 0.500" | |
Samuel Locations (United States) | Alpharetta, GA; Baton Rouge, LA; Denver, CO; Ham Lake, MN; Hayward, CA; Hermitage, PA; Houston, TX; Irving, TX; Marshfield, WI; Portland, OR; Tampa, FL; Troy, MI | |
Samuel Locations (Canada) | Dartmouth, NS; Hamilton, ON; Laval, QC; Bothwell, ON |
Stainless Fittings & Flanges B/W, Threaded, Socket Weld, Slip-On
Grade | 304L, 304L, 316, 316L, 317L, 321, 347, 410, LDX2101, 2205, 2507, 254SMO 20, 200, 400, 600, 625, 800H, 800HT, 825 | |
Size | 0.25" to 36" | |
Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, 3000#, 6000#, Sch5 - XXH |
Stainless Tube - Square
Grade | 304, 304L, 316, 316L | |
Size | 3/4" - 12+" |
Rectangular
Grade | 304, 304L, 316, 316L | |
Size | 1/2" x 1" - 6x10" | |
Finish | Note - All round, square and rectangular tubes are available with 2B/#1 HRAP, CDA, BA, 180 Grit, Polish & Buffed, Sanitary | |
Wall | 0.035" - 0.500" |